joke collection 100
Q: How many Bill Clintons does it take to change a light bulb?
A: None -- He'll only promise "change."
Q: How many Bill Clintons does it take to change a light bulb?
A: He doesn't. He whines a while, says "I feel your pain", and gets congress to pass a billion dollar light security bill, and blames republicans and special interests for not making lightbulbs free.
Q: How many US Presidents does it take to screw in a light bulb?
A: None, the constitution says that only Congress can screw in light bulbs, so only Congress is responsible for the dark, which is why we need a Constitutional ammendment.
Q: How many US Presidents does it take to screw in a light bulb?
A: Only one. If he can handle 250000000 people a day I think he can handle screwing one extra lightbulb.
Q: How many presidential candidates does it take to change a lightbulb ?
A: Less and less all the time.
Q: How many believable, competent, "just right for the job" presidential candidates does it take to change a lightbulb ?
A: It's going to be a dark 4 years, isn't it?
Q: How many presidential campaign staff does it need to change a light bulb?
A: 220! One to write a speech about how good it will be when the bulb is actually changed, one to write a speech about why the other candidates can't even spell "lightbulbe", eighteen to find out what the other candidates did when the lightbulb failed, and another two hundred to find out what the other candidate's families think about lightbulbs, bulbs, pear-shaped objects, light in general, any form of energy.
Q: How many Democratic presidential candidates from 1988 did it take to screw in a lightbulb ?
A: (Mike Dukakis) In Massachusetts, my enlightened government has made it unnecessary for people to screw in their own light bulbs, as we have put thousands of former welfare recipients to work for the Dept. of Light Bulb Installation. These employees will come to your home or business and install any incandescent bulb, on only a few months notice.
 |
|
|
|
|
 | ||||
A: None -- He'll only promise "change."
Q: How many Bill Clintons does it take to change a light bulb?
A: He doesn't. He whines a while, says "I feel your pain", and gets congress to pass a billion dollar light security bill, and blames republicans and special interests for not making lightbulbs free.
Q: How many US Presidents does it take to screw in a light bulb?
A: None, the constitution says that only Congress can screw in light bulbs, so only Congress is responsible for the dark, which is why we need a Constitutional ammendment.
Q: How many US Presidents does it take to screw in a light bulb?
A: Only one. If he can handle 250000000 people a day I think he can handle screwing one extra lightbulb.
Q: How many presidential candidates does it take to change a lightbulb ?
A: Less and less all the time.
Q: How many believable, competent, "just right for the job" presidential candidates does it take to change a lightbulb ?
A: It's going to be a dark 4 years, isn't it?
Q: How many presidential campaign staff does it need to change a light bulb?
A: 220! One to write a speech about how good it will be when the bulb is actually changed, one to write a speech about why the other candidates can't even spell "lightbulbe", eighteen to find out what the other candidates did when the lightbulb failed, and another two hundred to find out what the other candidate's families think about lightbulbs, bulbs, pear-shaped objects, light in general, any form of energy.
Q: How many Democratic presidential candidates from 1988 did it take to screw in a lightbulb ?
A: (Mike Dukakis) In Massachusetts, my enlightened government has made it unnecessary for people to screw in their own light bulbs, as we have put thousands of former welfare recipients to work for the Dept. of Light Bulb Installation. These employees will come to your home or business and install any incandescent bulb, on only a few months notice.
joke collection 104
Q: How many members of the Impossible Missions Force does it take to change a light bulb?
A: Five: While Cinnamon creates a diversion by wearing a skimpy dress, I use a tiny narcotic dart to knock out the fascist dictator and remove his body. Rollin, wearing a plastic mask, masquerades as the dictator long enough for Barney to sneak up to the next floor, drill a hole down into the light fixture, remove the burned-out bulb, and replace it with a new super-high wattage model of his own design. Meanwhile, Willie has driven up to the door in a laundry truck. Just before Rollin's real identity is revealed, we escape to the laundry truck, drive to the airfield, and return to the United States.
Q: How many SAS programmers does it take to change a light bulb?
A: Zero. We have the housekeeping staff do it for us.
Q: How many SAS programmers does it take to change a light bulb?
A: Please let us know!
Q: How many SAS programmers does it take to change a light bulb?
A: That depends; what color is the bulb?
Q: How many SAS programmers does it take to change a light bulb?
A: It all depends on whether they can read the manuals or not. That needs to be in there somewhere as a qualifier!
|
|
|
|
|
| ||||
A: Five: While Cinnamon creates a diversion by wearing a skimpy dress, I use a tiny narcotic dart to knock out the fascist dictator and remove his body. Rollin, wearing a plastic mask, masquerades as the dictator long enough for Barney to sneak up to the next floor, drill a hole down into the light fixture, remove the burned-out bulb, and replace it with a new super-high wattage model of his own design. Meanwhile, Willie has driven up to the door in a laundry truck. Just before Rollin's real identity is revealed, we escape to the laundry truck, drive to the airfield, and return to the United States.
Q: How many SAS programmers does it take to change a light bulb?
A: Zero. We have the housekeeping staff do it for us.
Q: How many SAS programmers does it take to change a light bulb?
A: Please let us know!
Q: How many SAS programmers does it take to change a light bulb?
A: That depends; what color is the bulb?
Q: How many SAS programmers does it take to change a light bulb?
A: It all depends on whether they can read the manuals or not. That needs to be in there somewhere as a qualifier!
joke collection 102
Q: How many lawyers does it take to change a light bulb?
A: Such number as may be deemed necessary to perform the stated task in a timely and efficient manner within the strictures of the following agreement:
Whereas the party of the first part, also known as "The Lawyer", and the party of the second part, also known as "The Light Bulb", do hereby and forthwith agree to a transaction wherein the party of the second part (Light Bulb) shall be removed from the current position as a result of failure to perform previously agreed upon duties, i.e., the lighting, elucidation, and otherwise illumination of the area ranging from the front (north) door, through the entry way, terminating at an area just inside the primary living area, demarcated by the beginning of the carpet, any spillover illumination being at the option of the party of the second part (Light Bulb) and not required by the aforementioned agreement between the parties. The aforementioned removal transaction shall include, but not be limited to, the following steps:
1.) The party of the first part (Lawyer) shall, with or without elevation at his option, by means of a chair, stepstool, ladder or any other means of elevation, grasp the party of the second part (Light Bulb) and rotate the party of the second part (Light Bulb) in a counter-clockwise direction, said direction being non-negotiable. Said grasping and rotation of the party of the second part (Light Bulb) shall be undertaken by the party of the first part (Lawyer) with every possible caution by the party of the first part (Lawyer) to maintain the structural integrity of the party of the second part (Light Bulb), notwithstanding the aforementioned failure of the party of the second part (Light Bulb) to perform the aforementioned customary and agreed upon duties. The foregoing notwithstanding, however, both parties stipulate that structural failure of the party of the second part (Light Bulb) may be incidental to the aforementioned failure to perform and in such case the party of the first part (Lawyer) shall be held blameless for such structural failure insofar as this agreement is concerned so long as the non-negotiable directional codicil (counter-clockwise) is observed by the party of the first part (Lawyer) throughout.
2.) Upon reaching a point where the party of the second part (Light Bulb) becomes separated from the party of the third part ("Receptacle"), the party of the first part (Lawyer) shall have the option of disposing of the party of the second part (Light Bulb) in a manner consistent with all applicable state, local and federal statutes.
3.) Once separation and disposal have been achieved, the party of the first part (Lawyer) shall have the option of beginning installation of the party of the fourth part("New Light Bulb"). This installation shall occur in a manner consistent with the reverse of the procedures described in step one of this selfsame document, being careful to note that the rotation should occur in a clockwise direction, said direction also being non-negotiable.
NOTE: The above described steps may be performed, at the option of the party of the first part (Lawyer), by said party of the first part (Lawyer), by his heirs and assigns, or by any and all persons authorized by him to do so, the objective being to produce a level of illumination in the immediate vicinity of the aforementioned front (north) door consistent with maximization of ingress and revenue for the party of the fifth part, also known as "The Firm".
|
|
|
|
|
| ||||
A: Such number as may be deemed necessary to perform the stated task in a timely and efficient manner within the strictures of the following agreement:
Whereas the party of the first part, also known as "The Lawyer", and the party of the second part, also known as "The Light Bulb", do hereby and forthwith agree to a transaction wherein the party of the second part (Light Bulb) shall be removed from the current position as a result of failure to perform previously agreed upon duties, i.e., the lighting, elucidation, and otherwise illumination of the area ranging from the front (north) door, through the entry way, terminating at an area just inside the primary living area, demarcated by the beginning of the carpet, any spillover illumination being at the option of the party of the second part (Light Bulb) and not required by the aforementioned agreement between the parties. The aforementioned removal transaction shall include, but not be limited to, the following steps:
1.) The party of the first part (Lawyer) shall, with or without elevation at his option, by means of a chair, stepstool, ladder or any other means of elevation, grasp the party of the second part (Light Bulb) and rotate the party of the second part (Light Bulb) in a counter-clockwise direction, said direction being non-negotiable. Said grasping and rotation of the party of the second part (Light Bulb) shall be undertaken by the party of the first part (Lawyer) with every possible caution by the party of the first part (Lawyer) to maintain the structural integrity of the party of the second part (Light Bulb), notwithstanding the aforementioned failure of the party of the second part (Light Bulb) to perform the aforementioned customary and agreed upon duties. The foregoing notwithstanding, however, both parties stipulate that structural failure of the party of the second part (Light Bulb) may be incidental to the aforementioned failure to perform and in such case the party of the first part (Lawyer) shall be held blameless for such structural failure insofar as this agreement is concerned so long as the non-negotiable directional codicil (counter-clockwise) is observed by the party of the first part (Lawyer) throughout.
2.) Upon reaching a point where the party of the second part (Light Bulb) becomes separated from the party of the third part ("Receptacle"), the party of the first part (Lawyer) shall have the option of disposing of the party of the second part (Light Bulb) in a manner consistent with all applicable state, local and federal statutes.
3.) Once separation and disposal have been achieved, the party of the first part (Lawyer) shall have the option of beginning installation of the party of the fourth part("New Light Bulb"). This installation shall occur in a manner consistent with the reverse of the procedures described in step one of this selfsame document, being careful to note that the rotation should occur in a clockwise direction, said direction also being non-negotiable.
NOTE: The above described steps may be performed, at the option of the party of the first part (Lawyer), by said party of the first part (Lawyer), by his heirs and assigns, or by any and all persons authorized by him to do so, the objective being to produce a level of illumination in the immediate vicinity of the aforementioned front (north) door consistent with maximization of ingress and revenue for the party of the fifth part, also known as "The Firm".
joke collection 12
Q: How many journalists does it take to screw in a lightbulb?
A: Three. One to report it as an inspired government program to bring light to the people, one to report it as a diabolical government plot to deprive the poor of darkness, and one to win a pulitzer prize for reporting that Electric Company hired a lightbulb assassin to break the bulb in the first place.
Q: How many computer journalists does it take to screw in a light bulb?
A: Five-one to write a review of all the existing light bulbs so you can decide which one to buy, another one to write a remarkably similar one in another magazine the next month, a third to have a big one come out on glossy paper two months later that is by then completely out of date, a fourth to hint in his/her column that a completely new and updated bulb is coming out, and the fifth to report a rumor that that new bulb is shipping with a virus.
Q: How many GLC workers does it take to change a lightbulb ?
A: Four. One to do it and three to go round putting up posters announcing that the GLC, working for London, is going to change the lightbulb.
Q: How many city planners does it take to screw in a light bulb?
A: Six - four to write an extensive study recommending a three-way 100/200/250 watt light bulb, one to write an article in the newspaper praising the study, and one to put in a 10 watt blub instead.
|
|
|
|
|
| ||||
A: Three. One to report it as an inspired government program to bring light to the people, one to report it as a diabolical government plot to deprive the poor of darkness, and one to win a pulitzer prize for reporting that Electric Company hired a lightbulb assassin to break the bulb in the first place.
Q: How many computer journalists does it take to screw in a light bulb?
A: Five-one to write a review of all the existing light bulbs so you can decide which one to buy, another one to write a remarkably similar one in another magazine the next month, a third to have a big one come out on glossy paper two months later that is by then completely out of date, a fourth to hint in his/her column that a completely new and updated bulb is coming out, and the fifth to report a rumor that that new bulb is shipping with a virus.
Q: How many GLC workers does it take to change a lightbulb ?
A: Four. One to do it and three to go round putting up posters announcing that the GLC, working for London, is going to change the lightbulb.
Q: How many city planners does it take to screw in a light bulb?
A: Six - four to write an extensive study recommending a three-way 100/200/250 watt light bulb, one to write an article in the newspaper praising the study, and one to put in a 10 watt blub instead.
Page 8 of 27 «« Previous | Next »»